Dynacord Set DSP Controller/Endstufen, DSP 260 + LX 2200 + LX 3000 + Case, gebraucht

Dynacord Set DSP Controller/Endstufen, DSP 260 + LX 2200 + LX 3000 + Case, gebraucht Dynacord Set DSP Controller/Endstufen, DSP 260 + LX 2200 + LX 3000 + Case, gebraucht
  • knapper Lagerbestand
  • ArtikelNr.: 93232500
  • Versandgewicht: 40,00 kg
  • Artikelgewicht: 32,00 kg
  • Lieferzeit: 2 - 5 Werktage
  • Unser Preis : 2.790,00 €
  • inkl. 0% USt., zzgl. Versand (nach Gewicht)
Wird geladen ...

Kategorie:

Beschreibung

Dynacord Set DSP Controller/Endstufen, DSP 260 + LX 2200 + LX 3000 + Case, gebraucht



 

DSP Controller / Endstufe

Set enthält:

  • 1x Dynacord DSP 260, DSP Controller 
  • 1x Dynacord LX 2200 Endstufe (2x 1100 W)
  • 1x Dynacord LX 3000 Endstufe (2x 1500 W)
  • 1x Case (Mixercase, 3 obige Geräte verbaut)
  • Gesamtgewicht: 30 kg
  • Versandkostenpauschale: 100 €

Beachten Sie:

  • Dieses Set ist zusätzlich mit einer passende PA-Anlage (Dynacord 2x F150 + 2x F8) in unserem Shop erhätlich

Technische Daten:

Dynacord DSP 260 

  • Mains Voltage 100-240 VAC 50-60 Hz
  • Power Consumption 25W
  • Analog Inputs 2x XLR IN, electronically balanced, 2x XLR THRU OUT, electronically balanced
  • Digital Inputs 1x XLR AES/EBU IN
  • Nominal Input Voltage 1.23 V / +4 dBu
  • Maximum Input Voltage (Without -6dB Analog Pad Engaged) 8.7 V / +21 dBu
  • Input Impedance 10k ohm
  • Common Mode Rejection -80 dB @ 1 kHz (typical)
  • A/D Conversion 24-Bit Sigma-Delta
  • Outputs 6x XLR OUT, electronically balanced
  • Nominal Output Voltage 1.23 V / +4 dBu
  • Maximum Output Voltage 8.7 V / +21 dBu
  • Output Impedance 50 ohm
  • D/A Conversion 24-Bit Sigma-Delta
  • Frequency Response 10 Hz-22 kHz (+/- 0.5 dB)
  • THD+N < 0.01% (band limited 22Hz-22kHz)
  • Dynamic Range 111 dB unweighted, band limited 22 Hz - 22 kHz
  • USB USB Type B on front panel (PC Interface)
  • 9-pin DSUB Software Confi gurable for GPI Preset Recall or Master/Slave Connection to second DSP260 unit
  • Sample Rate 48 kHz
  • Data Format 24-Bit
  • Internal Processing 32-Bit Floating Point
  • Physical
  • Dimensions (WxHxD) 19 x 14 x 1.75 inches (482.6 x 355.6 x 44.45 mm)
  • Weight (Net) 10.1 lb (4.6 kg)

Dynacord LX 2200

  • Load Impedance 2 O, 4 O, 8 O
  • Max. Midband Output Power, THD = 1%, 1kHz 2 O - 1600 W, 4 O - 1100 W, 8 O - 600 W
  • Rated Output Power, THD < 0.1%, 20Hz ? 20kHz 4 O - 900 W, 8 O - 450 W
  • Max. Single Channel Output Power, Dynamic Headroom, IHF-A 2 O - 2600 W, 4 O - 1400 W, 8 O - 720 W
  • Max. Single Channel Output Power, Continuous, 1kHz 2 O - 2100 W, 4 O - 1300 W, 8 O - 660 W
  • Max. Bridged Output Power, THD = 1%, 1kHz 4 O - 3200 W, 8 O - 2200 W
  • Maximum RMS Voltage Swing, THD = 1%, 1kHz 78 V
  • Power Bandwith, ref. 1kHz, THD =1%, half power @ 4 ohms 10Hz ? 60kHz
  • Voltage Gain, ref. 1kHz 32.0 dB
  • Input Sensitivity, rated power @ 8 ohms, 1kHz +5.8 dBu (1.51 V rms)
  • THD at rated output power, MBW = 80kHz, 1kHz < 0.05%
  • IMD-SMPTE, 60Hz, 7kHz < 0.02%
  • DIM 30, 3,15kHz, 15kHz < 0.05%
  • Maximum Input Level +22 dBu (9.76 V rms)
  • Crosstalk, ref. 1kHz, at rated output power < -80 dB
  • Frequency Response, ref 1kHz 15Hz ? 40kHz (-1dB)
  • Input Impedance, active balanced 20 kohms
  • Damping Factor, 1kHz > 300
  • Slew Rate 35 V/µs
  • Signal to Noise Ratio, A-weighted 107 dB
  • Output Stage Topology Class H
  • Power Requirements 100V, 120V, 220V, 230V, 240 V; 50Hz ? 60Hz (factory configured)
  • Power Consumption, 1/8 max. output power @ 4 ohms 850 W
  • Protection Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak current Limiters Inrush Current Limiters, Turn-On delay
  • Cooling Front-to rear, 3-stage fans
  • Ambient Temperature Limits +5° ? +40° ( 40°F ? 105°F )
  • Safety Class I
  • Dimensions ( W x H x D ) mm 483 x 88.1 x 384
  • Weight 8.15 kg (18.0 lbs)

Dynacord LX 3000

  • Load Impedance 2 O, 4 O, 8 O
  • Max. Midband Output Power, THD = 1%, 1kHz 2 O - 2100 W, 4 O - 1500 W, 8 O - 900 W
  • Rated Output Power, THD < 0.1%, 20Hz ? 20kHz W, 4 O - 1200 W, 8 O - 900 W
  • Max. Single Channel Output Power, Dynamic Headroom, IHF-A 2 O - 2900 W, 4 O - 1800 W, 8 O - 1000 W
  • Max. Single Channel Output Power, Continuous, 1kHz 2 O - 2600 W, 4 O - 1700 W, 8 O - 950 W
  • Max. Bridged Output Power, THD = 1%, 1kHz W, 4 O - 4200 W, 8 O - 3000 W
  • Maximum RMS Voltage Swing, THD = 1%, 1kHz 95 V
  • Power Bandwith, ref. 1kHz, THD =1%, half power @ 4 ohms 10Hz ? 60kHz
  • Voltage Gain, ref. 1kHz 32.0 dB
  • Input Sensitivity, rated power @ 8 ohms, 1kHz +7.0 dBu (1.74 V rms)
  • THD at rated output power, MBW = 80kHz, 1kHz < 0.05%
  • IMD-SMPTE, 60Hz, 7kHz < 0.02%
  • DIM 30, 3,15kHz, 15kHz < 0.05%
  • Maximum Input Level +22 dBu (9.76 V rms)
  • Crosstalk, ref. 1kHz, at rated output power < -80 dB
  • Frequency Response, ref 1kHz 15Hz ? 40kHz (-1dB)
  • Input Impedance, active balanced 20 kohms
  • Damping Factor, 1kHz > 300
  • Slew Rate 38 V/µs
  • Signal to Noise Ratio, A-weighted 108 dB
  • Output Stage Topology Class H
  • Power Requirements 100V, 120V, 220V, 230V, 240 V; 50Hz ? 60Hz (factory configured)
  • Power Consumption, 1/8 max. output power @ 4 ohms 1070 W
  • Protection Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak current Limiters Inrush Current Limiters, Turn-On delay
  • Cooling Front-to rear, 3-stage fans
  • Ambient Temperature Limits +5° ? +40° ( 40°F ? 105°F )
  • Safety Class I
  • Dimensions ( W x H x D ) mm 483 x 88.1 x 384
  • Weight 8.70 kg (19.2 lbs)